Using the BayStack 450 10/100/1000 Series Switch
9
Review "SNMP-Based
Security" in Chapter 1.
Go to the TELNET/SNMP
Manager List Configuration
screen.
TELNET/SNMP
Manager List Configuration
screen
Configure the following
screen fields (as described in
"TELNET/SNMP Manager
List Configuration"
in Chapter 3):
o Allowed Source IP Address
o Allowed Source Mask
Done
Figure E-13.
SNMP-Based Security
E-14
Note:
SNMP security configuration
values also apply to
TELNET logins.
Key
Off-page reference
On-page reference
BS450112A
309978-D Rev 01