Port Configuration; Figure 3-22. Port Configuration Screen (1 Of 2) - Nortel BayStack 450-24T Using Manual

Baystack 450 10/100/1000 series switch
Hide thumbs Also See for BayStack 450-24T:
Table of Contents

Advertisement

Port Configuration

The Port Configuration screen (Figures 3-22 and 3-23) allows you to configure
specific switch ports or all switch ports. You can enable or disable the port status
of specified switch ports, set the switch ports to autonegotiate for the highest
available speed of the connected station, or you can set the speed for selected
switch ports (autonegotiation is not supported on fiber optic ports).
You can disable switch ports that are trunk members; however, the screen prompts
for verification of the request before completing the action. Choosing [Yes]
disables the port and removes it from the trunk.
Note: The Autonegotiation, Link Trap, Speed, and Duplex fields are
independent of MultiLink Trunking, rate limiting, VLANs, IGMP Snooping,
and the STP.
Choose Port Configuration (or press p) from the Switch Configuration Menu to
open the Port Configuration screen.
Port
Trunk
----
-----
------------
1
[ Enabled
2
[ Enabled
3
[ Enabled
4
[ Enabled
5
[ Enabled
6
1
[ Enabled
7
1
[ Enabled
8
[ Enabled
9
1
[ Enabled
10
[ Enabled
11
[ Enabled
12
[ Enabled
13
2
[ Enabled
14
2
[ Enabled
Press Ctrl-N to display choices for additional ports..
Use space bar to display choices, press <Return> or <Enter> to select choice.
Press Ctrl-R to return to previous menu.
Figure 3-22.
Port Configuration Screen (1 of 2)
309978-D Rev 01
Port Configuration
Unit:
Status
Link
-----
]
Up
]
Up
]
Up
]
Up
]
Down
]
Up
]
Up
]
Down
]
Up
]
Down
]
Up
]
Up
]
Up
]
Up
[ 1 ]
LnkTrap
Autonegotiation
-------
---------------
[ On
]
[ Enabled
[ On
]
[ Enabled
[ Off ]
[ Disabled ]
[ Off ]
[ Disabled ]
[ On
]
[ Disabled ]
[ On
]
[ Enabled
[ On
]
[ Enabled
[ Off ]
[ Disabled ]
[ On
]
[ Enabled
[ On
]
[ Disabled ]
[ Off ]
[ Disabled ]
[ Off ]
[ Disabled ]
[ On
]
[ Enabled
[ On
]
[ Enabled
Press Ctrl-C to return to Main Menu.
Using the Console Interface
Speed
Duplex
-----------------
]
[ 100Mbs / Half ]
]
[ 10Mbs
/ Full ]
[ 10Mbs
/ Full ]
[ 100Mbs / Half ]
[ 100Mbs / Full ]
]
[ 100Mbs / Full ]
]
[ 100Mbs / Full ]
[ 100Mbs / Half ]
]
[ 100Mbs / Full ]
[ 100Mbs / Half ]
[ 100Mbs / Half ]
[ 100Mbs / Half ]
]
[ 100Mbs / Full ]
]
[ 100Mbs / Full ]
More...
3-59

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Baystack 450-12fBaystack 450-12t

Table of Contents