Figure 3-18. Vlan Configuration Screen - Nortel BayStack 450-24T Using Manual

Create VLAN:
Delete VLAN:
VLAN Name:
Management VLAN: [ Yes ]
1-6
------
Unit #1 UUUUUU
Unit #2 UUUUUU
Unit #3 UUUUUU
Unit #4 UUUUUU
Enter VLAN Number: 1
KEY: T = Tagged Port Member, U = Untagged Port Member, - = Not a Member of VLAN
Use space bar to display choices, press <Return> or <Enter> to select choice.
Press Ctrl-R to return to previous menu.
Figure 3-18. VLAN Configuration Screen
Table 3-14 describes the VLAN Configuration screen fields.
Table 3-14. VLAN Configuration Screen Fields
Field
Create VLAN
309978-D Rev 01
VLAN Configuration
[ 1 ]
[ ]
[ VLAN #1 ]
Port Membership
7-12 13-18
------ ------
UUUUUU UUUUUU
UUUUUU UUUUUU
UUUUUU UUUUUU
UUUUUU UUUUUU
Description
Allows you to set up or view configured VLAN workgroups. Enter the number of the
new VLAN you want to create or view, and then press [Enter]. The Port Membership
fields indicate the corresponding VLAN workgroup configuration, if configured, or all
dashes (-), indicating no VLAN Members configured. Alternatively, you can use the
spacebar to toggle through the various configured VLAN workgroups. You can
create up to 64 different VLANs (including VLAN 1).
Default 1
Range 2 to 4094
Using the Console Interface
VLAN Type:
Protocol Id (PID): [
User-Defined PID:
VLAN State:
19-24 25
------ ------
UUUUUU
UUUUUU U
UUUUUU
UUUUUU
Press Ctrl-C to return to Main Menu.
[ Port-Based
None
[ 0x0000 ]
[ Active
(continued)
3-47
]
]
]