Ip Configuration/Setup; Figure 3-3. Ip Configuration/Setup Screen - Nortel BayStack 450-24T Using Manual

IP Configuration/Setup

The IP Configuration/Setup screen (Figure 3-3) allows you to set or modify the
BayStack 450 switch IP configuration parameters and to verify a station's IP
address using the ping feature. Data that you enter in the user-configurable fields
takes effect as soon as you press [Enter].
Choose IP Configuration/Setup (or press i) from the main menu to open the
IP Configuration/Setup screen.
In-Band Stack IP Address:
In-Band Switch IP Address: [ 0.0.0.0 ]
In-Band Subnet Mask:
Default Gateway:
IP Address to Ping:
Start Ping:
Use space bar to display choices, press <Return> or <Enter> to select choice.
Press Ctrl-R to return to previous menu.
Figure 3-3. IP Configuration/Setup Screen
Note: The read-only fields in this screen are updated based on the BootP mode
specified in the BootP Request Mode field. (See "BootP Request Mode" on
page 3-11 for more information.)
309978-D Rev 01
IP Configuration/Setup
BootP Request Mode:
Configurable
-------------------
[ 0.0.0.0 ]
[ 0.0.0.0 ]
[ 0.0.0.0 ]
[ 0.0.0.0 ]
[ No ]
[ BootP Disabled
In Use
---------------
0.0.0.0
0.0.0.0
Press Ctrl-C to return to Main Menu.
Using the Console Interface
]
Last BootP
---------------
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
3-9