Removing An Installed Gbic; Figure C-10. Removing A Gbic - Nortel BayStack 450-24T Using Manual

Figure C-9.
3.
4.

Removing an Installed GBIC

To remove an installed GBIC:
1.
Figure C-10.
2.
309978-D Rev 01
Installing A GBIC
Press on the front of the GBIC until it snaps into place.
Remove the rubber plug from the connectors to connect cables.
If the GBIC has spring tabs, press in on the tabs on each side of the GBIC
as you pull the GBIC out of the MDA's Host port (Figure C-10).
Removing a GBIC
If the GBIC has an extractor handle, grasp the handle and pull firmly to
remove the GBIC from the MDA's Host port.
9825FA
9826FA
Media Dependent Adapters
C-21