Periodic Inspection - TOHATSU EverRun MX 25H Owner's Manual

ENOM01106-1

2. Periodic Inspection

It is important to inspect and maintain your outboard motor regularly. Make sure to per-
form each service at interval specified in the chart below. Maintenance intervals are
determined by the number of hours outboard motor has been used or number of
months, whichever comes first.
Recode inspection performed in the INSPECTION & MAINTENANCE LOG at the back of
this manual.
Item
Carburetor *1
Fuel filter
Fuel System
Piping/Hose
Fuel tank
Spark plugs
Ignition
Ignition
timing *1
Starting
Starter rope
System
Propeller
Gear oil
Lower Unit
Water
pump *1
Bolt and Nuts
Sliding and Rotating Parts.
Grease Nipples
Outer Equipment
Anode
*1: Have this handled by your dealer.
Servicing Interval
50 hours
10 hours or
or
1 month
3 months
INSPECTION AND MAINTENANCE
Every 100
Action
hours or 6
months
Strip, clean and adjust.
Adjust idling.
Check and clean or Replace
if necessary.
Check and Replace if
necessary.
Clean.
Check gaps. Remove
carbon deposits or Replace
if necessary.
Adjust timing.
Check for wear or damage.
Check for bend blades,
damage, wear.
Change or replenish-oil and
check for water leaks.
Check for wear or damage.
Retighten.
Apply and pump in grease.
Check for corrosion.
Check for corrosion and
deformation.
51
Remarks
0.9-1.0 mm
(0.035-0.039 in)
10
Replace impeller
every 12 months.
Replace if necessary.