Periodic Inspection - TOHATSU EverRun MX 15E2 Owner's Manual

Table of Contents

Advertisement

ENOM01106-1

2. Periodic Inspection

It is important to inspect and maintain your outboard motor regularly. Make sure to per-
form each service at interval specified in the chart below. Maintenance intervals are
determined by the number of hours outboard motor has been used or number of
months, whichever comes first.
Recode inspection performed in the INSPECTION & MAINTENANCE LOG at the back of
this manual.
Item
Carburetor *1
Fuel filter
Fuel System
Piping/Hose
Fuel tank
Spark plugs
Ignition
Ignition timing *1
Starter motor *1
Starting System
Battery
Starter rope
Propeller
Lower Unit
Gear oil
Water pump *1
Bolt and Nuts
Sliding and Rotating Parts.
Grease Nipples
*1: Have this handled by your dealer.
Servicing Interval
10 hours or
50 hours or
1 month
3 months
INSPECTION AND MAINTENANCE
Action
Every 100
hours or
6 months
Strip, clean and adjust.
Adjust idling.
Check and clean or
Replace.
Check and Replace.
Clean.
Check gaps. Remove
carbon deposits or
Replace.
Adjust timing.
Check for salt deposits and
battery cable condition.
Check Installation, fluid
quantity, gravity.
Check for wear or damage.
Check for bend blades,
damage, wear.
Change or replenish-oil and
check for water leaks.
Check for wear or damage.
Retighten.
Apply and pump in grease.
49
Remarks
10
Replace impeller
every 12 months.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Everrun mx 18e2

Table of Contents