Table of Contents
Advertisement
38
Occupant safety – Brief overview of most important points
If components of the restraint system have been
deployed, the 6 restraint system warning lamp
lights up continuously.
& WARNING Risk of injury due to malfunc-
tions in the restraint system
Components in the restraint system may be
activated unintentionally or not deploy as
intended in an accident.
Have the restraint system checked and
#
repaired immediately at a qualified spe-
cialist workshop.
Mercedes-Benz recommends that you have the
vehicle towed to a qualified specialist workshop.
Function of the seat belt warning lamp
The ü seat belt warning lamp in the Instru-
ment Display is a reminder that all vehicle occu-
pants must wear their seat belts correctly.
In addition, a warning tone may sound.
As soon as the driver and front passenger fasten
their seat belts, the seat belt warning goes out.
Function of the rear seat belt status display
The rear seat belt status display is only available
for certain countries.
When the ignition is switched on, the rear seat
belt status display informs you for a certain
amount of time which rear seat belt is not fas-
tened.
You can immediately dismiss the rear seat belt
status display using the back button on the left-
hand side of the steering wheel (
If a vehicle occupant unfastens a seat belt in the
rear while the vehicle is motion, the rear seat belt
status display appears again.
In addition, a warning tone may sound. In this
case, the rear seat belt status display cannot be
hidden using the back button on the left-hand side
of the steering wheel.
Function of the PASSENGER AIR BAG indicator
lamps (front passenger airbag)
page 219).
/
Advertisement
Table of Contents
