G-Mode - Mercedes-Benz G-Class 2022 Operator's Manual

Table of Contents

Advertisement

Displaying vehicle data
Multimedia system:
Vehicle
e DYNAMIC SELECT
4
5
Select
Vehicle
data.
#
The following information is displayed:
Compass
R
Wheel angle
R
Incline
R
Gradient
R
Altitude
R
LOW RANGE (
page 157)
/
R
Locking (
page 158)
/
R
Displaying engine data
Multimedia system:
Vehicle
e DYNAMIC SELECT
4
5
Select
Engine
data.
#
%
The actual (maximum) values that can be ach-
ieved for engine output and engine torque
may deviate from the certified values within
the country-specific guidelines for permissible
tolerances (basis: UN-ECE No. 85 or country-
specific guidelines).
Factors that can influence this are, for exam-
ple:
Sea level
R
Fuel quality
R
Outside temperature
R
Operating temperature of the engine
R
%
The values displayed serve only as orienta-
tion. The values for engine output and engine
torque shown in the media display may devi-
ate from the actual values.

G-Mode

G-ModeO is an additional drive program for
off-road journeys and is not suitable for use on
firm road surfaces. O is automatically activa-
ted, if one of the following conditions is met:
you shift the transfer case to the LOW RANGE
R
off-road gear(
page 157).
/
Driving and parking 151
you engage at least one differential lock
R
(
page 159).
/
The O message will appear on the instrument
display.
O is automatically deactivated again, if the fol-
lowing conditions are met:
you shift the transfer case to the on-road posi-
R
tion HIGH RANGE.
you disengage all differential locks.
R
Not all driving and driving safety systems are
available in O under certain circumstances.
Observe the system limits of the transfer case
(
page 157) and the differential locks
/
(
page 158).
/
It is not possible to change the drive program with
the DYNAMIC SELECT switch in O. The
DYNAMIC SELECT switch works again only when
O has been deactivated.

Advertisement

Table of Contents
loading

Table of Contents