Table of Contents
Advertisement
150 Driving and parking
Selecting the drive program
Push DYNAMIC SELECT switch
#
backwards.
The selected drive program appears in the
instrument display and media display.
Selecting the drive program ë (Desert)
Change the ; drive program.
#
Press and hold the DYNAMIC SELECT switch
#
1
backwards for approx. three seconds.
A message is shown in the instrument display
and a warning tone sounds.
Drive program ë is selected.
Confirm the message with the left touchpad
#
on the steering wheel.
The
Desert drive progr. active ESP unavaila-
ble See Owner's Manual
the instrument display. The ESP
warning lamps light up.
%
Observe the notes on the Desert ESP
(
page 177).
/
%
A message appears again and a warning tone
sounds when the driver's door is opened and
the vehicle has been started to draw attention
1
forwards or
to restricted road suitability in case of a
change of drivers.
Press the DYNAMIC SELECT switch
#
wards to deactivate the ë drive program.
%
The A drive program is automatically
active after starting the vehicle.
Configuring drive program I
Multimedia system:
Vehicle
4
Individual
5
Select the individual setting.
#
Switching the operation feedback for drive pro-
message appears in
grammes on or off
®
and ABS
Multimedia system:
Vehicle
4
®
Activate O or deactivate ª
#
tion.
When this function is active, a corresponding
message is shown in the media display when a
drive programme is selected with the
DYNAMIC SELECT switch.
1
for-
e DYNAMIC SELECT
5
e DYNAMIC SELECT
5
User notifica-
Advertisement
Table of Contents
