Table of Contents
Advertisement
The Wi-Fi connection to a Wi-Fi-capable
device, e.g. the customer's mobile phone or a
tablet PC is established.
Multimedia system as a Wi-Fi hotspot
R
Using this function, a tablet PC or notebook
can be connected, for example.
To establish a connection, you can use the follow-
ing methods:
WPS PIN
R
The connection to a secure Wi-Fi network is
made via a PIN.
WPS PBC
R
The connection to a secure Wi-Fi network is
made by pressing a button (push button).
Security key
R
The connection to a secure Wi-Fi network is
made via a security key.
▌Setting up Wi-Fi
Requirements
The device to be connected supports one of
R
the three means of connection described
(
page 246).
/
Multimedia system:
System
ö Connectivity
4
5
Activating/deactivating Wi-Fi
Activate O or deactivate ª Wi-Fi.
#
Wi-Fi
If
is deactivated ª, communication via
Wi-Fi to all devices is interrupted. This also
means that a connection to the HERMES com-
munication module cannot be established.
Then functions such as dynamic route guid-
ance with Live Traffic Information are not avail-
able.
Connecting the multimedia system with a device
via Wi-Fi
This function is not available if a HERMES commu-
nication module is installed.
Multimedia system 247
The type of connection established must be selec-
ted on the multimedia system and on the device
to be connected.
%
The connection procedure may differ depend-
ing on the device. Follow the instructions that
are shown in the display. Further information
(see the manufacturer's operating instruc-
tions).
Select
Internet
settings.
#
Select
Search for Wi-Fi
networks.
#
Using a security key
Select a Wi-Fi network in the list.
#
Have the security key displayed on the device
#
to be connected (see the manufacturer's oper-
ating instructions).
Enter this security key on the multimedia sys-
#
tem.
Confirm the entry with ¡.
#
%
All devices support a security key as a means
of connection.
Advertisement
Table of Contents
