Table of Contents
Advertisement
▌Setting the stationary heater/ventilation via
remote control
Requirements:
The fuel tank is filled to at least the reserve
R
level.
Switching on immediately
Press and hold the u button.
#
Setting the departure time
Briefly press the u button.
#
Press the , or . button repeatedly
#
until the time to be changed appears on the
display.
Press the u and ^ buttons simultane-
#
ously.
The Î symbol on the remote control display
will flash.
Use the , and . buttons to set the
#
desired departure time.
Press the u and ^ buttons simultane-
#
ously.
The new departure time will be stored.
Up to three departure times can be stored.
To activate the departure time: select the
#
desired departure time and press and hold
the u button.
The Í symbol, the departure time and,
depending on the selected departure time, the
letter A, B or C will appear on the display.
Climate control 131
To deactivate the departure time: select the
#
desired departure time and press and hold
the ^ button.
OFF will appear on the display.
To check the status of the active stationary
#
heater: briefly press the u button.
Switching off immediately
Press and hold the ^ button.
#
▌Overview of the remote control displays (sta-
tionary heater/ventilation)
1
Stationary ventilation switched on
2
Stationary heater switched on
Advertisement
Table of Contents
