Table of Contents
Advertisement
404 Wheels and tyres
Using the wheel wrench, loosen the wheel
#
bolts on the wheel you wish to change by
about one full turn. Do not unscrew the
screws completely.
& WARNING Risk of injury from incorrect
positioning of the jack
If you do not position the jack correctly at the
appropriate jacking point of the vehicle, the
jack could tip with the vehicle raised.
Only position the jack at the appropriate
#
jacking point of the vehicle. The base of
the jack must be positioned vertically
under the jacking point of the vehicle.
* NOTE Damage to the vehicle due to the
jack
If you do not position the jack at the jack sup-
port points provided for this purpose, you
could damage your vehicle.
Only position the jack at the jack sup-
#
port points provided for this purpose.
Raising the vehicle at the front
Make sure that the adapter is secured on the
#
jack.
Position jack
4
on the comfort bushing on
#
transverse link 5.
Raise the vehicle by pumping until the tyre is
#
no more than 3 cm off the ground.
Loosen and remove the wheel (
#
page 405).
/
Advertisement
Table of Contents
