Mercedes-Benz G-Class 2022 Operator's Manual page 182

Table of Contents

Advertisement

System limits
STEER CONTROL may be impaired or may not
function in the following situations:
®
ESP
is deactivated.
R
®
ESP
is malfunctioning.
R
The steering is malfunctioning.
R
®
If ESP
is malfunctioning, you will be assisted fur-
ther by the electric power steering.
HOLD function
▌HOLD function
The HOLD function holds the vehicle at a stand-
still without requiring you to depress the brake
pedal, e.g. while waiting in traffic.
The HOLD function is only an aid. The responsibil-
ity for the vehicle safely standing still remains with
the driver.
System limits
The HOLD function is only intended to provide
assistance when driving and is not a sufficient
means of safeguarding the vehicle against rolling
away when stationary.
The incline must not be greater than 30%.
R
▌Activating/deactivating the HOLD function
& WARNING Risk of an accident due to the
HOLD function being active when you
leave the vehicle
If the vehicle is only braked with the HOLD
function it could, in the following situations,
roll away:
If there is a malfunction in the system or in
R
the power supply.
If the HOLD function is deactivated by
R
depressing the accelerator pedal or brake
pedal, e.g. by a vehicle occupant.
Always secure the vehicle against rolling
#
away before you leave it.
Requirements
The vehicle is stationary.
R
The driver's door is closed or the seat belt on
R
the driver's side is fastened.
Driving and parking 179
The vehicle has been started or has been
R
automatically switched off by the ECO start/
stop function.
The electric parking brake is released.
R
Active Distance Assist DISTRONIC is deactiva-
R
ted.
The transmission is in position h, k or i.
R
Activating the HOLD function
Depress the brake pedal, and after a short
#
time quickly depress further until the ë
display appears in the Instrument Display.
Release the brake pedal.
#
Deactivating the HOLD function
Depress the accelerator pedal to pull away.
#
or
Depress the brake pedal until the ë display
#
disappears from the Instrument Display.
The HOLD function is deactivated in the following
situations:
Active Distance Assist DISTRONIC is activa-
R
ted.

Advertisement

Table of Contents
loading

Table of Contents