Table of Contents
Advertisement
When the electrical connection is established
between the vehicle and the trailer, the display
changes to the side camera view 1.
This view supports manoeuvring procedures with
a trailer.
Side view of the mirror cameras
The sides of the vehicle can be seen in this view.
1
Guide line of external vehicle dimensions with
outside mirrors folded out
2
Marker of the wheel contact points
System limits
If the reversing camera is not operational, the fol-
lowing symbol appears in the media display.
If you drive faster than 16 km/h, the view of the
360° Camera is switched off and does not reap-
pear automatically when you drive slower again.
System limits
The 360° Camera will not function or will only
partially function in the following situations:
The doors are open.
R
The side mirrors are folded in.
R
The rear-end door is open.
R
There is heavy rain, snow or fog.
R
The light conditions are poor, e.g. at night.
R
Cameras, or vehicle components in which the
R
cameras are fitted, are damaged, dirty or cov-
ered. Observe the information on vehicle sen-
sors and cameras (
page 173).
/
Do not use the 360° Camera under such circum-
stances. You could injure others or collide with
objects when parking or manoeuvring the vehicle.
Driving and parking 201
For technical reasons, inaccuracies in the guide
lines and in the display of the generated images
may occur in the following situations:
If the vehicle is carrying a heavy load when the
R
default height is changed.
When the differential locks are engaged.
R
%
The contrast of the media display may be
impaired by abrupt, direct sunlight or by other
light sources, forexample, when driving out of
a garage. In this case, pay extra attention.
%
Have the media display repaired or replaced
if, forexample, pixel errors considerably
restrict its use.
See the notes on cleaning the 360° Camera
(
page 371).
/
Advertisement
Table of Contents
