Table of Contents
Advertisement
Also ensure that no objects, e.g. a cushion,
are ever placed between a person and the
seat.
Fastening and adjusting seat belts
If the seat belt is pulled quickly or sharply, the
seat belt retractor locks. The seat belt strap can-
not be pulled out any further.
Always engage seat belt tongue
#
belt into seat belt buckle
2
sponding seat.
To adjust the seat belt height: press button
#
on the seat belt outlet and slide the seat belt
outlet to the desired position.
To engage the seat belt outlet: release button
#
3
and ensure that the seat belt outlet
engages.
* NOTE Deployment of components of the
restraint system when the front passenger
seat is unoccupied and a seat belt is
buckled
When the front passenger seat is unoccupied
and the seat belt tongue of the seat belt is
engaged in the seat belt buckle, components
of the restraint system may deploy unnecessa-
rily on the front passenger side, e.g. the seat
belt tensioner.
Only buckle the seat belts as intended.
#
Left and right rear seat:
Occupant safety – Brief overview of most important points
1
of the seat
* NOTE Deployment of the seat belt ten-
of the corre-
sioner due to a seatbelt that is buckled
when a rear seat is unoccupied
3
If the seat belt tongue is engaged in the seat
belt buckle of the unoccupied rear seat, the
seat belt tensioner may also deploy in the
event of an accident along with other systems.
Only buckle the seat belts as intended.
#
Function of the restraint system warning lamp
When the ignition is switched on, a self-test is per-
formed, during which the 6 restraint system
warning lamp lights up. It goes out no later than a
few seconds after the vehicle is started. The com-
ponents of the restraint system are then func-
tional.
A malfunction has occurred in the restraint sys-
tem if:
the 6 restraint system warning lamp does
R
not light up when the ignition is switched on.
the 6 restraint system warning lamp lights
R
up continuously or repeatedly during a journey
37
Advertisement
Table of Contents
