21.5.3 Serial interface pins
The pins used by each serial interface are listed below.
To connect the dedicated flash programmer to the pins of a serial interface that is connected to another device on
the board, care must be exercised so that signals do not collide or that the other device does not malfunction.
CHAPTER 21 FLASH MEMORY
Table 21-5. Pins Used by Each Serial Interface
Serial Interface
CSI10
CSI10 + HS
UART6
Preliminary User's Manual U16846EJ1V0UD
Pins Used
SO10, SI10, SCK10
SO10, SI10, SCK10, HS/P15
TxD6, RxD6
343