Introduction To The Preloaded Applications; Purpose Of The User Guide; Intended Audience; Conventions Used In This Document - Distech Controls ECLYPSE ECY-303 User Manual

Introduction to the Preloaded Applications

Introduction to the Preloaded Applications
The ECLYPSE Connected Equipment Controller series (ECY-303 Series controllers) are designed to
control a wide range of small and medium terminal applications "out of the box" with preloaded, config-
urable applications and embedded ENVYSION Viewer, for local hosting of application graphics.
Distech Controls' ECY-303 controllers come preloaded with code containing standard applications.
This code was created using EC- gfx Program, a Graphical Programming Interface (GPI) tool that en-
ables visual assembly of building blocks and the design of custom programs that control Building Au-
tomation Systems.
A controller's preloaded applications can be configured using the EC- gfx Program Configuration Assis-
tant or xpressENVYSION pre-loaded graphics provides an intuitive interface for configuring con-
trollers.
Alternatively, an Allure™ EC-Smart-Vue Sensor can be used to configure a controller's preloaded ap-
plications on site.
Controllers can also be custom-programmed using EC- gfx Program. With this GPI tool, quick and easy
control sequences can be created which meet the most demanding requirements of any engineering
specification.

Purpose of the User Guide

This user guide is intended to provide information and instruct a user to configure an ECY-303 con-
troller from its preloaded applications using either the ECY-303 Preloaded Applications Web Interface
through ENVYSION™ Viewer or an Allure EC-Smart-Vue sensor. However, this guide is not designed
to instruct the user on how to use an ECY-303 controller. For information on this controller series, refer
to its datasheet and to the EC- gfx Program user guide, both of which are available on the Distech Con-
trols website.
This user guide only explains hardware installation in a general sense. Please refer to the individual device's
installation guides for specific hardware installation information.
This user guide does not provide and does not intend to provide instructions for safe wiring practices. It is the
user's responsibility to adhere to the safety codes, safe wiring guidelines and safe working practices of the local
area. This user guide does not intend to provide all the information and knowledge of an experienced HVAC
technician or engineer.

Intended Audience

This user guide is intended for system designers, integrators, and field technicians who have experi-
ence with control systems. It is recommended that anyone installing and configuring the devices speci-
fied in this user guide have prior training in the usage of these devices.

Conventions Used in this Document

Notes

This is an example of Note text. Wherever the note-paper icon appears, it means the associated text is giving a
time-saving tip or a reference to associated information of interest.

Cautions and Warnings

This is an example of Caution and Warning text. Wherever the exclamation icon appears, it means that there
may be an important safety concern or that an action taken may have a drastic effect on the device, equipment,
and/or network if it is done improperly.
8 ECY-303 Preloaded Applications