Renesas R-IN32M3 Series User Manual page 118

R-IN32M3-CL User's Manual
Rev. Date
4.00 Dec. 28, 2018 6
Description
Page Summary
1.5 Base Addresses of the System Registers Area
The description on the base addresses of the system registers area was added.
13 2.1.4 Port Pins and Real-Time Port Pins
The pin name indicated as "CCM_IRZ" was modified to "CCM_IRLZ".
16 2.1.6 DMA Interface Pins
The description on the section and caution was modified.
20 2.1.14 CC-Link Pins (Intelligent Device Station)
The name and functional descriptions of the CC-Link (intelligent device station)
pins were modified.
41, 44 3. Memory Maps
Note describing that the addresses the instruction RAM mirror area (768 Kbytes)
where access actually occurs will change according to the select boot mode,
was added.
Figure 3.1 Memory Map (All)
Figure 3.5 External MCU Interface Area
44 Figure 3.5 External MCU Interface Area
Locations of instruction RAM area and instruction RAM mirror area, corrected
58 7.2 Port Configuration
"Application and Operation" for the port function control registers and the port
function control expansion registers was modified.
58 7.2 Port Configuration
Caution on the port configuration was modified.
72 to 7.3.3 Port Mode Control Registers (PMC, RPMC)
80 7.3.4 Port Function Control Registers (PFC, RPFC)
7.3.5 Port Function Control Expansion Registers (PFCE, RPFCE)
Notes on the multiplexed functions were modified.
85 7.4 List of Selectable Multiplexed Functions
Pins name indicated as "CCM_IRZ" was modified to "CCM_IRLZ".
— Error corrected, description modified, and contents and expressions adjusted
Revision History
C-4