Renesas R-IN32M3 Series User Manual page 116

R-IN32M3-CL User's Manual
Rev. Date
2.00 Feb. 07, 2014 41
2.01 Apr. 18, 2014
2.02 Dec. 25, 2014 3
3.00 Jan. 22, 2016
Description
Page Summary
Addition the register of 6.1.2 CC-Link IE Field (Intelligent Device Station) Wait
Delay Register (CIEWAITDLY)
42 Modification of Address of 6.1.4 CC-Link IE Field (Intelligent Device Station)
Bus Bridge Control Register (CIESMC)
57 Modification of initial value of PM0W, PM4W, and PRM0W registers of 7.3.2
Port Mode Registers (PM, RPM)
overall Modification of CC-Link pins (remote device station)
17 Addition of the contents of Note of 2.1.13 CC-Link IE Field Pins (Intelligent
Device Station)
28 Modification of pin setting of 2.5.7 CC-Link IE Field Pin (Intelligent Device
Station)
71 Addition of the signals of CCI_WAITEDGEH / CCI_WRLENH of 7.4 List of
Selectable Multiplexed Functions
Change status for Intelligent device station for CC-Link in 1.3 Overview
80 Remove IOLP521, IOLP520 bit at 7.5.6 Port 5 Buffer Switching Registers
(DRCTLP5L, DRCTLP5H) (because driving capability of P52 is fixed to 6mA.)
6-24 2. Pin Functions
Meaning of the items, symbols, and abbreviations, added to the list of pins
Description unified
7 2.1.1 (1) PHY Interface Pins
・Note for the value during reset and after reset, modified
・The value of the ETH_MDC pin during reset and after reset, modified
9 2.1.2 External Memory Interface Pins
・The value of BUSCLK during reset and after reset, modified
・Supplemental explanations added to Note 1
17 2.1.10 Trace Pins
The value of TRACECLK during reset and after reset, modified
21 2.1.15 CC-Link Pins (Remote Device Station)
Note added to CCM_CLK80M
22 2.1.16 System Pins
・Functional description and active level of XT1/XT2/OSCTH/JTAGSEL, modified
・The value of RSTOUTZ/CLKOUT25M0-1 during reset and after reset, modified
23-24 2.1.18 Operating Mode Setting Pins
・Functional description of the ADMUXMODE pin, modified
・The list of the combinations of available operating mode setting pins, added
25-33 2.2 Pin States
The initial states for all boot modes and all port pins, added
36 2.5.4 System Pins
・Recommended connection when not using XT1/XT2, modified
Note added
・Recommended connection when not using RESETZ/PONRZ/OSCTH/
JTAGSEL, modified
Revision History
C-2