Renesas R-IN32M3 Series User Manual page 50

R-IN32M3-CL User's Manual
Pin Name
P70-P77
RP00-RP07
RP10-RP17
RP20-RP27
RP30-RP37
2.5.7 Operating Mode Setting Pins
Pin Name
BOOT0, BOOT1
MEMIFSEL
BUS32EN
HIFSYNC
HWRZSEL
MEMCSEL
ADMUXMODE
2.5.8 CC-Link IE Field Pin (Intelligent Device Station)
Pin Name
CCI_CLK2_097M
Caution: This pin requires a clock input even when the CC-Link IE field is not in use.
2.5.9 CC-Link Pin (Intelligent Device Station, Remote Device Station)
Pin Name
CCM_CLK80M
2.5.10 Trace Pins
Pin Name
TRACECLK
TRACEDATA0-3
R18UZ0005EJ0400
Dec. 28, 2018
I/O
I/O Programmable I/O buffer (3.3 V) (6 mA)
Resistor select function
(50kΩ pull-up or 50kΩ pull-down or less)
I/O Programmable I/O buffer (3.3 V)
Load drive select function (6 mA, 12 mA)
Resistor select function
(50kΩ pull-up or 50kΩ pull-down or less)
I/O
I Input buffer (3.3 V) Schmitt in
I/O Interface
I Input buffer (3.3 V)
I/O
I Input buffer (3.3 V)
I/O
O Output buffer (3.3 V) 6 mA
Interface
Interface
Recommended Connection when Not in
Connect a 2.097152-MHz oscillator even
when the CC-Link IE field is not in use
Interface
Interface
2. Pin Functions
Recommended Connection
when Not in Use
Open
Recommended Connection
when not in Use
Set these pins according to
the operating mode
Use
Recommended Connection
when Not in Use
Connect to GND
Recommended Connection
when Not in Use
Open
Page 40 of 104
(2/2)