Thermo Scientific Dionex TCC-100 Operating Instructions Manual page 45

Relays Tab Page
The Relays tab page lists all available relays. (To access this tab page, select the column
thermostat in the Server Configuration program, and then select Properties... on the context
menu.) Click a check box to enable or disable the corresponding relay. Make sure that the
required relays are selected; if they are not, they will not be available in Chromeleon.
Option
TCC_RELAY_1
TCC_RELAY_2
Inputs Tab Page
The Inputs tab page lists all available remote inputs. (To access this tab page, select the column
thermostat in the Server Configuration program, and then select Properties... on the context
menu.) Click a check box to enable or disable the corresponding input. Make sure that the
required remote inputs are selected; if they are not, they will not be available in Chromeleon.
Option
TCC_INPUT_1
TCC_INPUT_2
Error Levels Tab
The Error Levels tab page classifies the severity of any errors that occur. (To access this tab
page, select the column thermostat in the Server Configuration program, and then select
Properties... on the context menu.) It is generally not necessary to change the default settings.
Finally, save and close the changed server configuration.
Important: Before turning off the column compartment, always "disconnect" the unit
in Chromeleon.
For more information about how to configure the column compartment, refer to the Chromeleon
online Help.
Description
Relay 1
Relay 2
Description
Remote input 1
Remote input 2
TCC-100 Operating Instructions
39