Thermo Scientific Dionex TCC-100 Operating Instructions Manual page 42

TCC-100 Operating Instructions
General Tab Page
Define the general instrument parameters:
• Verify that Demo Mode is disabled. (If Demo Mode is enabled, the Module address section
and the Firmware Download button are disabled.)
• The Device Name field indicates the name under which the column compartment is identified
in the installation environment. Do not change the default device name (ColumnOven).
Please note:
• Click the Browse... button to select the Module address of the desired column compartment.
This opens a window showing information about all available installed column compartments
(USB and LAN connections).
Fig. 34: General tab page
If you change the default device name, the links to the corresponding
control panels may no longer be available.
Fig. 35: Device list
36