Thermo Scientific Dionex TCC-100 Operating Instructions Manual page 44

TCC-100 Operating Instructions
Configuration Tab Page
Use the Configuration tab page to determine the configuration of the column compartment:
Option
Internal MSV
Column Id System
Temperature Signal
Pressure Unit
Fig. 36: Configuration tab page
Description
Select this check box if the column compartment is equipped with a column
switching valve.
This check box is selected by default. Accept the setting if you want to use the
column identification system and the corresponding properties. For more
information, see page 40.
Accept the default names (Column_A, Column_B) under which the columns are
identified in the installation environment or enter new names. If you change the
default device name, the links to the corresponding control panels may no longer be
available.
Deselect this check box if you do not want to use the column identification system.
Select the check box if you want to record the temperature as a separate channel.
For more information, see page 40.
Accpet the default name, ColumnOven_TEMP, under which the temperature
signal is identified in the installation environment or enter a new name. If you
change the default device name, the links to the corresponding control panels may
no longer be available.
Determine the pressure unit to be used by the software. The following options are
available: bar, MPa, and psi.
38