Thermo Scientific Dionex TCC-100 Operating Instructions Manual page 34

TCC-100 Operating Instructions
Configure the network adapter for the instrument LAN (here: [2] 3Com Fast EtherLink XL
NIC (3C905B-TX)) on the Bindings tab page. First, select all protocols in the Show
Bindings for field to verify that the TCP/IP protocol is installed. Install the TCP/IP protocol,
if necessary:
Fig. 30: Show Bindings for all protocols
Then, select all adapters in the Show Bindings for field and disable all protocols for the
adapter for the instrument LAN except the TCP/IP protocol:
Fig. 31: Show Bindings for all adapters
28