NEC PG-6200 User Manual page 96

Auto Power ON Mode Setting
The AUTO POWER ON MODE is a convenient way to start up the
projector without pressing the POWER button. You can turn the
projector on and off by supplying AC power to the projector.
To do this, proceed as follows:
1 Press the ADJUST button to display the "ADJUST" menu.
• The projector may ask you to enter your passcode.
See page 52 for the explanation of the PASSCODE.
2 Use the CURSOR
or
line. Press ENTER to display the "OPTION" menu. You can also
select the "OPTION" menu directly by pressing the INPUT "9"
button.
• The eighth item is "8/OPTION" in stand alone adjust menu.
3 Use the CURSOR
or
MODE" line. Press ENTER to display the "SETTING MODE"
menu. You can also select the "SETTING MODE" menu directly
by pressing the INPUT "1" button.
4 Use the CURSOR
or
ON MODE" item on Page 2, then press ENTER to display the
"AUTO POWER ON MODE" menu.
NOTE: The SETTING MODE has three menus. The "AUTO
POWER ON MODE" item is on the second menu (P02). To
access P02 from P01, press and hold down the CTL button then
press the button; to return to P01 from P02, press and hold
down the CTL button then press the
button to highlight the "9/OPTION"
button to highlight the "1/SETTING
button to select the "AUTO POWER
button.
– A D J U S T –
1 / S I G N A L E N T R Y
2 / F O C U S
3 / A L I G N M E N T
4 / C O N V E R G E N C E
5 / W H I T E B A L
6 / R , G , B G A I N
7 / H O U R M E T E R
8 / P A S S C O D E
9 / O P T I O N
– O P T I O N –
1 / S E T T I N G M O D E
2 / M E N U M O D E
3 / S E Q U E N C E R
4 / P J A D D R E S S
5 / V E R S I O N
P02
DEFAULT INPUT SELECT
AUTO POWER ON MODE
WARM-UP MODE
PHOSPHOR SAVER
SIGNAL SWITCHING
75
OPTION – SETTING MODE –
LAST
INACTIVE
INACTIVE
OFF
SOUND
MUTE ON
PICTURE
MUTE ON
SETTING