NEC PG-6200 User Manual page 46

1 2 3 4 5 6
BASIC OPERATION.
1 2 3 4 5 6
1 2 3 4 5 6
1 2 3 4 5 6
1 2 3 4 5 6
1 2 3 4 5 6
Picture Projection
3 6
POWER
ON OFF
OPERATE 1 ABC 2 DEF 3 GHI
PICTURE
4 JKL 5 MNO 6 PQR
MUTE
SOUND
7 STU 8 VWX 9 YZ /
MUTE
DISPLAY 10 ,.
STATIC
R
B
CTL NORMAL ENTER END
User remote control
To project a picture source, proceed as follows:
1 Turn on the main power of the projector.
• Press the POWER switch on the front terminal panel.
2 Turn on the power of the connected equipments.
3 Turn on the power of the projector.
• Press the POWER ON button on the remote control or the POWER button on the rear panel.
4 Select an input signal source by pressing one of the ten INPUT buttons on the remote control. You can also select a signal from
the "INPUT SELECT" list.
• See "INPUT SELECTION" on page 23 for more details.
5 Adjust the picture and sound.
• See pages 19 through 22 for more details.
NOTE: The volume function works only with the ISS-6010/ISS-6010G Switcher.
6 To turn off the power, press the POWER OFF button on the remote control or the POWER button on the rear panel.
7 Press the POWER switch on the front terminal panel to turn off the main power of the projector.
8 Last, turn off the connected equipment power.
4
3 6
POWER CONTROL OPERATE ENTER END DOWN
Projector
1 7
POWER AC INPUT
16
REMOTE STANDBY POWER
NORMAL
UP
/ LOAD
Rear control panel
REMOTE 2 R G B H / V V ACAT
REMOTE 1 OPTION 1 S-VIDEO VIDEO
H/V&V
HIGH 75
Front terminal panel