NEC PG-6200 User Manual page 11

PROJECTION CONFIGURATION CHANGE
Opening Top Cover
CAUTION:
• Be sure to turn off the projector and unplug the power cord before
opening the top cover.
To open the top cover, proceed as follows:
1 Loosen two screws A.
• A is a retaining screw.
2 Raise the top front of the projector in the direction of the arrow.
• Be sure to open the top cover until the hinges lock.
3 To close it, push the hinges in the direction of the arrow, then,
close the top cover.
4 Tighten the two A screws.
A
10
Hinge
Hinge