NEC PG-6200 User Manual page 63

4) Press and hold the CTL button then press any one of the
CURSOR buttons to select the position to be adjusted. (The
marker on the selected side will turn to a solid color.)
CTL + ...... U (Up)
CTL + ...... D (Down)
CTL + ...... R (Right)
CTL + ...... L (Left)
5) Use the CURSOR buttons to adjust
.......... Corrects spindle-shape dot horizontally and
vertically
.......... Corrects spindle-shape dot diagonally
Adjust the dots on the selected side to the same shape as the
center dots.
6) Repeat steps 2) for the other CRTs.
7) To end this adjustment, press the END button.
• Whenever the END button is pressed, the menu will sequence
in this order:
"FOCUS" menu "ADJUST" menu
• If the "RETURN USER MODE?" menu appears, use the
CURSOR or button to select either "YES" or "NO" and
then press ENTER. This will exit the ADJUST mode.
Items to select
• YES ......... When you try to enter the ADJUST mode the next
time, you will need to re-enter your passcode.
• NO ........... When you try to enter the ADJUST mode the next
time, you will not need to re-enter your passcode.
Source screen
35
F O C U S
- A S T I G C O R N E R -
C R T - R -
S C R E E N - D R -
H V
S K
RETURN USER MODE?
Y E S N O
ADJUSTMENT
6 0 %
4 0 %