NEC PG-6200 User Manual page 38

2) Use the CURSOR
ENTER.
Items to select
• YES ......... The picture parameter data of the selected signal
will be stored in the DEFAULT AREA.
• NO ........... The picture parameter data of the selected signal
will not be stored in the DEFAULT AREA.
• CANCEL ... All cancelled information will be stored in the
DEFAULT AREA.
• If the "SIGNAL ENTRY" list will be displayed, this
completes the CHANGE DEFAULT mode.
• To end the "SIGNAL ENTRY" list, go on to Step 5.
5 To complete the signal entry, press the END button.
• Whenever the END button is pressed, the menus will sequence
in this order:
"ADJUST" menu Source screen.
• When your passcode is in effect, the "RETURN USER
MODE?" screen will be displayed. If this happens, use the
CURSOR or button to select either "YES" or "NO" and
press ENTER.
Items to select
• YES ......... When you try to enter the ADJUST mode the next
time, you will need to re-enter your passcode.
• NO ........... When you try to enter the ADJUST mode the next
time, you will not need to re-enter your passcode.
or button to select an item and press
STORE TO DEFAULT AREA?
23
SIGNAL ENTRY
Y E S N O C A N C E L
RETURN USER MODE?
Y E S N O