NEC PG-6200 User Manual page 48

BASIC OPERATION
Storing Projector Settings (Automatic Save Feature)
You have two options to store projector settings in the memory:
automatically and manually.
When the Automatic Save Feature mode is set to "ENABLE",
projector settings will be stored in the projector's memory
automatically.
Storing settings are done when any one of the following proce-
dures is performed:
• The END button is pressed several times to return the adjust-
ment screen to the source screen.
• One input is switched to another.
• The projector is turned off.
When the Automatic Save Feature mode is set to "DISABLE",
projector settings can be stored in the projector's memory
manually.
If the current status is not stored due to pressing another button,
the "STORE ?" message is displayed. Use the CURSOR
button to select either "YES" or "NO" and press the ENTER
button.
• If the adjustments have not been changed, the "STORE ?"
message is not displayed.
• To exit the mode without storing the current status, select
"NO".
NOTE: The Automatic Save Feature mode has been set to
DISABLE by factory. For information on setting, contact your
dealer.
or
18
S T O R E ?
Y E S N O