NEC PG-6200 User Manual page 108

ASTIG Adjustment
This function is used to set ASTIG ADJUSTMENT on/off.
NOTE: You can carry out ASTIG CROSS and ASTIG CORNER
adjustment in focus mode only when the ASTIG ADJUSTMENT is
set to on.
To set this function, proceed as follows:
1 Press the ADJUST button to display the "ADJUST" menu.
• The projector may ask you to enter your passcode.
See page 52 for the explanation of the PASSCODE.
2 Use the CURSOR
or
line. Press ENTER to display the "OPTION" menu. You can also
select the "OPTION" menu directly by pressing the INPUT "9"
button.
• The eighth item is "8/OPTION" in stand alone adjust menu.
3 Use the CURSOR
or
MODE" line. Press ENTER to display the "SETTING MODE"
menu. You can also select the "SETTING MODE" menu directly
by pressing the INPUT "1" button.
4 Use the CURSOR
or
MENT" item on Page 3, then press ENTER to display the
"ASTIG ADJUSTMENT" menu.
NOTE: The SETTING MODE has three menus. The "ASTIG
ADJUSTMENT" item is on the third menu (P03).
To access P03 from P01, press and hold down the CTL button
then press the button twice; to return to P01 from P03, press
and hold down the CTL button then press the
button to highlight the "9/OPTION"
button to highlight the "1/SETTING
button to select the "ASTIG ADJUST-
button twice.
– A D J U S T –
1 / S I G N A L E N T R Y
2 / F O C U S
3 / A L I G N M E N T
4 / C O N V E R G E N C E
5 / W H I T E B A L
6 / R , G , B G A I N
7 / H O U R M E T E R
8 / P A S S C O D E
9 / O P T I O N
– O P T I O N –
1 / S E T T I N G M O D E
2 / M E N U M O D E
3 / S E Q U E N C E R
4 / P J A D D R E S S
5 / V E R S I O N
P03
AUTOMATIC DATA STORE
DIRECT ENTRY ACCESS
ASTIG ADJUSTMENT
FOCUS EDGE MODE
87
SETTING
OPTION – SETTING MODE –
DISABLE
DISABLE
OFF
ALL