NEC PG-6200 User Manual page 75

5 Hold down the CTL button then select the CRT you wish to
adjust with the R and B buttons.
NOTE: Always be aware of what color the on-screen CRT
display is showing (R, G, B). If that color's test pattern is turned
off, any adjustment to that color displays the "THIS COLOR IS
NOT APPLICABLE" message.
6 Use the CURSOR buttons to move the cursor to the point to be
adjusted.
• Pressing the CURSOR
Pressing the CURSOR
Pressing the CURSOR
Pressing the CURSOR
bottom.
7 Hold down the CTL button then use the CURSOR buttons to
align the Red or Blue pattern with the Green pattern.
8 Repeat steps 4 to 7 for the other CRTs if necessary.
9 To end this adjustment, press END.
• Whenever END is pressed, the menus will sequence in this
order:
"CONVERGENCE" menu
screen
• If the "RETURN USER MODE?" menu appears, use the
CURSOR or button to select either "YES" or "NO" and
then press ENTER. This will exit the ADJUST mode.
Items to select
• YES ......... When you try to enter the ADJUST mode again,
you will need to re-enter your passcode.
• NO ........... When you try to enter the ADJUST mode again,
you will not need to re-enter your passcode.
button moves the cursor to the right.
button moves the cursor to the left.
button moves the cursor to the top.
button moves the cursor to the
"ADJUST" menu Source
C O N V E R G E N C E
- P O I N T -
C R T - R -
47
ADJUSTMENT
R E T U R N U S E R M O D E ?
Y E S N O