NEC PG-6200 User Manual page 81

SETTING
Connecting to the Switcher
This setting explains how the projector is used with the ISS-6010/
ISS-6010G Switcher.
1 Press the ADJUST button to display the "ADJUST" menu.
• The projector may ask you to enter your passcode.
See page 52 for the explanation of the PASSCODE.
2 Use the CURSOR
or
line. Press ENTER to display the "OPTION" menu. You can also
select the "OPTION" menu directly by pressing the INPUT "9"
button.
• The eighth item is "8/OPTION" in stand alone adjust menu.
3 Use the CURSOR
or
MODE" line. Press ENTER to display the "SETTING MODE"
menu. You can also select the "SETTING MODE" menu directly
by pressing the INPUT "1" button.
4 Use the CURSOR
or
CONDITION" item, then press ENTER to display the "CON-
NECT CONDITION" menu.
NOTE: The SETTING MODE has three menus. The "CONNECT
CONDITION" item is on the first menu (P01). To access P02 or
P03 from P01, press and hold down the CTL button then press
the button; to return to P01 from P02 or P03, press and hold
down the CTL button then press the
5 Use the CURSOR
or
tion condition of Switcher and press ENTER.
• The "RE-START ?" prompt is displayed after setting of the
connection condition is modified from the current status to your
desired condition.
Items to select
• STAND ALONE .... The projector used in stand alone operation.
• SW 1 LEVEL ........ The projector used with one Switcher.
• SW 2 LEVEL ........ The projector used with two or more
Switchers.
button to highlight the "9/OPTION"
button to highlight the "1/SETTING
button to select the "CONNECT
button.
button to select your desired connec-
– A D J U S T –
1 / S I G N A L E N T R Y
2 / F O C U S
3 / A L I G N M E N T
4 / C O N V E R G E N C E
5 / W H I T E B A L
6 / R , G , B G A I N
7 / H O U R M E T E R
8 / P A S S C O D E
9 / O P T I O N
– O P T I O N –
1 / S E T T I N G M O D E
2 / M E N U M O D E
3 / S E Q U E N C E R
4 / P J A D D R E S S
5 / V E R S I O N
P01
CONNECT CONDITION
ASTIG OUTPUT
DEGAUSS
POINT CONVERGENCE
S-VIDEO MODE SELECT
VIDEO MODE SELECT
60
OPTION – SETTING MODE –
STANDALONE
CEILING
FRONT
ENABLE
S2
AUTO
C O N N E C T C O N D I T I O N
S T A N D A L O N E
S W 1 L E V E L
S W 2 L E V E L