NEC PG-6200 User Manual page 45

SIGNAL ENTRY
Setting "ASTIG"
This function is used to set memory space that is used for ASTIG
data storage.
NOTE: Use the USER memory area (USER-1 through 5) when
adjusting ASTIG. Set to DEFAULT normally.
1) Use the CURSOR buttons to select "ASTIG" and then press
ENTER.
• The ASTIG memory area menu is displayed.
2) Use the CURSOR
ASTIG memory areas and then press ENTER.
4 To complete, press the END button.
• Whenever the END button is pressed, the menus will sequence
in this order:
"ADJUST" menu Source screen
• When your passcode is in effect, the "RETURN USER
MODE?" screen is displayed. If this happens, use the
CURSOR or button to select either "YES" or "NO" and
press ENTER.
Items to select
• YES ......... When you try to enter the ADJUST mode the next
time, you will need to re-enter your passcode.
• NO ........... When you try to enter the ADJUST mode the next
time, you will not need to re-enter your passcode.
or button to select any one of the
SOURCE INFORMATION
M-01 S-01
FREQUENCY
fh =
fv =
SYNC
HD ( )
VIDEO MODE
NTSC 3.58
POSITION
WIDE
30
NAME
Khz SYNC DETECT
.
. Hz AUTO COMP.
COLOR TEMP
VD ( ) 6500 K
COUNTER
FONT ASTIG
NORMAL
A S T I G
D E F A U L T
U S E R - 1
U S E R - 2
U S E R - 3
U S E R - 4
U S E R - 5
R E T U R N U S E R M O D E ?
Y E S N O
LOCK
OFF
AKB
OFF
TIMER
:
DEFAULT