Table of Contents
Advertisement
4 Press the R, G, and B button to project the CRT beam to be
adjusted.
• You can turn on or off each CRT beam (R, G, and B)separately.
NOTE:
• The CENTER and EDGE SEPA. focus adjustment should be
performed for each CRT separately.
• The EDGE ALL focus adjustment affects all the three CRTs at
the same time.
5 Hold down the CTL button then select the CRT you wish to
adjust with the R, G, and B button.
• The display of the corresponding CRT will change from one
CRT to another.
NOTE:
• You do not need to select the CRT color for the EDGE ALL
focus.
• Always be aware of what color the on-screen CRT display is
showing (R, G, B) when "CENTER" or "EDGE SEPA." is
selected. If that color's test pattern is turned off, any adjust-
ment to that color will display the "THIS COLOR IS NOT
APPLICABLE" message.
6 Use the CURSOR buttons to adjust the focus.
When selecting "CENTER"
• Pressing the
or
button increases the control levels of the
center focus. (The gauge mark in the scale moves to the right.)
• Pressing the
or
button decreases the control levels of the
center focus. (The gauge mark in the scale moves to the left.)
To switch to the FOCUS EDGE mode:
press and hold CTL, then press CURSOR
When selecting "EDGE ALL"/"EDGE SEPA."
• Press and hold the CTL button then press any one of the
CURSOR buttons to select the position to be adjusted. (The
marker on the selected side will turn to a solid color.)
CTL +
.... U (Up)
CTL +
.... D (Down)
Use the CURSOR buttons to adjust the focus.
• Pressing the
or
button increases the control levels of the
edge focus. (The gauge mark in the scale moves to the right.)
• Pressing the
or
button decreases the control levels of the
edge focus. (The gauge mark in the scale moves to the left.)
To switch to the FOCUS CENTER mode:
press and hold CTL, then press CURSOR
them twice to change to the EDGE DOWN adjustment.
.
CTL +
..... R (Right)
CTL +
..... L (Left)
. You need to press
F O C U S
- C E N T E R -
C R T - R -
F O C U S
- E D G E A L L -
U
F O C U S
- E D G E S E P A R A T E -
C R T - R -
U
33
ADJUSTMENT
1 0 %
1 0 %
1 0 %
Hide quick links:
Advertisement
Table of Contents
