NEC PG-6200 User Manual page 83

SETTING
ASTIG OUTPUT
This function allows you to reverse the astigmatic polarity. ASTIG
output depends on the projector installation. Select the appropriate
item according to the installation condition. Changing the ASTIG
OUTPUT setting automatically degausses the CRTs.
Proceed as follows:
1 Press the ADJUST button to display the "ADJUST" menu.
• The projector may ask you to enter your passcode.
See page 52 for the explanation of the PASSCODE.
2 Use the CURSOR
or
line. Press ENTER to display the "OPTION" menu. You can also
select the "OPTION" menu directly by pressing the INPUT "9"
button.
• The eighth item is "8/OPTION" in stand alone adjust menu.
3 Use the CURSOR
or
MODE" line. Press ENTER to display the "SETTING MODE"
menu. You can also select the "SETTING MODE" menu directly
by pressing the INPUT "1" button.
4 Use the CURSOR
or
PUT" item, then press ENTER to display the "ASTIG OUTPUT
MODE" menu.
NOTE: The SETTING MODE has three menus. The "ASTIG
OUTPUT" item is on the first menu (P01). To access P02 or
P03 from P01, press and hold down the CTL button then press
the button; to return to P01 from P02 or P03, press and hold
down the CTL button then press the
button to highlight the "9/OPTION"
button to highlight the "1/SETTING
button to select the "ASTIG OUT-
button.
– A D J U S T –
1 / S I G N A L E N T R Y
2 / F O C U S
3 / A L I G N M E N T
4 / C O N V E R G E N C E
5 / W H I T E B A L
6 / R , G , B G A I N
7 / H O U R M E T E R
8 / P A S S C O D E
9 / O P T I O N
– O P T I O N –
1 / S E T T I N G M O D E
2 / M E N U M O D E
3 / S E Q U E N C E R
4 / P J A D D R E S S
5 / V E R S I O N
P01
CONNECT CONDITION
ASTIG OUTPUT
DEGAUSS
POINT CONVERGENCE
S-VIDEO MODE SELECT
VIDEO MODE SELECT
62
OPTION – SETTING MODE –
STANDALONE
CEILING
FRONT
ENABLE
S2
AUTO