NEC PG-6200 User Manual page 106

Direct Entry Access Setting
This feature allows you to switch the current input directly to one of
the registered inputs from NO1 to NO10 in the INPUT LIST.
NOTE: To use this feature, hold down the CTL button and press one
of the INPUT buttons corresponding to the input number.
To set this feature, proceed as follows:
1 Press the ADJUST button to display the "ADJUST" menu.
• The projector may ask you to enter your passcode.
See page 52 for the explanation of the PASSCODE.
2 Use the CURSOR
or
line. Press ENTER to display the "OPTION" menu. You can also
select the "OPTION" menu directly by pressing the INPUT "9"
button.
• The eighth item is "8/OPTION" in stand alone adjust menu.
3 Use the CURSOR
or
MODE" line. Press ENTER to display the "SETTING MODE"
menu. You can also select the "SETTING MODE" menu directly
by pressing the INPUT "1" button.
4 Use the CURSOR
or
ACCESS" item on Page 3, then press ENTER to display the
"DIRECT ENTRY ACCESS" menu.
NOTE: The SETTING MODE has three menus. The "DIRECT
ENTRY ACCESS" item is on the third menu (P03).
To access P03 from P01, press and hold down the CTL button
then press the button twice; to return to P01 from P03, press
and hold down the CTL button then press the
button to highlight the "9/OPTION"
button to highlight the "1/SETTING
button to select the "DIRECT ENTRY
button twice.
– A D J U S T –
1 / S I G N A L E N T R Y
2 / F O C U S
3 / A L I G N M E N T
4 / C O N V E R G E N C E
5 / W H I T E B A L
6 / R , G , B G A I N
7 / H O U R M E T E R
8 / P A S S C O D E
9 / O P T I O N
– O P T I O N –
1 / S E T T I N G M O D E
2 / M E N U M O D E
3 / S E Q U E N C E R
4 / P J A D D R E S S
5 / V E R S I O N
P03
AUTOMATIC DATA STORE
DIRECT ENTRY ACCESS
ASTIG ADJUSTMENT
FOCUS EDGE MODE
85
SETTING
OPTION – SETTING MODE –
DISABLE
DISABLE
OFF
ALL