Input Selection - NEC PG-6200 User Manual

Input Selection

You can switch from one input to any other input signal.
Proceed as follows:
1 Press the OPERATE button.
• The "OPERATE" menu is displayed.
2 Use the CURSOR
or
SELECT" line and press ENTER to display the "INPUT SE-
LECT" list. You can also select the "INPUT SELECT" list
directly by pressing the INPUT "4" button.
• The "3/SOUND" item is not included in stand alone operate
menu.
• When the projector is used in stand alone operation, the third
item is "3/INPUT SELECT".
3 Use the CURSOR
or
switched to and press ENTER to switch to the selected input
signal.
NOTE: To advance to the next page or to the previous page,
hold down the CTL button then press the CURSOR
button. To directly access the page, hold down the CTL button
then any one of the INPUT buttons.
4 To end the INPUT SELECT list, press the END button.
• Whenever the END button is pressed, the screen changes in this
order:
"OPERATE" menu
button to highlight the "4/INPUT
button to highlight the signal to be
Source screen
P01
ISS-6010
NO
0 1
0 2
0 3
0 4
or
0 5
0 6
0 7
0 8
0 9
1 0
23
BASIC OPERATION
– O P E R A T E –
1 / P I C T U R E
2 / P O S I T I O N
3 / S O U N D
4 / I N P U T S E L E C T
5 / S O U R C E I N F O
6 / S T A T I C
INPUT SELECT
SW 2 LEVEL
INPUT NAME
M – 01 S – 01 V T R – 1
M – 01 S – 02 V T R – 2
M – 01 S – 03 V I D E O - 1
M – 01 S – 04 V T R – 3
M – 01 S – 05 R G B - 1
M – 01 S – 06 V I D E O - 2
M – 01 S – 07 V I D E O - 3
M – 01 S – 08 N T S C
M – 01 S – 09 P A L
M – 01 S – 10 S E C A M
DATE
12 / 01 / 90
12 / 03 / 90
12 / 11 / 90
12 / 24 / 90
12 / 25 / 90
12 / 30 / 90
12 / 31 / 90
01 / 15 / 91
01 / 16 / 91
01 / 29 / 91