Mechanical Safety - Huawei UPS5000-E-180 kVA User Manual

UPS5000-E-180 kVA
User Manual (Integrated UPS, 30 kVA Power
Modules)
●
●
●
●
●
●

1.5 Mechanical Safety

When working at heights, wear a safety helmet and safety harness or waist belt
and fasten it to a solid structure. Do not mount it on an insecure moveable object
or a metal object with sharp edges. Make sure that the hooks will not slide off.
Ensure that all necessary tools are ready and inspected by a professional
organization. Do not use tools that have signs of scratches or fail to pass the
inspection or whose inspection validity period has expired. Ensure that the tools
are secure and not overloaded.
Issue 05 (2024-01-30)
in a low-lying land prone to water or snow accumulation, and the horizontal
level of the site must be above the highest water level of that area in history.
Before opening doors during the installation, operation, and maintenance of
the equipment, clean up any water, ice, snow, or other foreign objects on the
top of the equipment to prevent foreign objects from falling into the
equipment.
When installing the equipment, ensure that the installation surface is solid
enough to bear the weight of the equipment.
Ensure that the equipment room provides good heat insulation, and that the
walls and floor are dampproof.
Install protective devices at the door of the equipment room to prevent
rodents and insects from entering the room.
All cable holes must be sealed. Seal the used cable holes with sealing putty.
Seal the unused cable holes with the caps delivered with the equipment. The
following figure shows the criteria for correct sealing with sealing putty.
After installing the equipment, remove idle packing materials such as cartons,
foam, plastics, and cable ties from the equipment area.
D ANGER
WARNING
Copyright © Huawei Digital Power Technologies Co., Ltd.
1 Safety Information
17