Chapter 3 - Software Installation; Introduction; Loading Multivoip Software Onto The Pc - Multitech MultiVOIP MVP210 User Manual

Chapter 3 – Software Installation

Introduction

Configuring software for your MultiVOIP entails three tasks:
Loading the software onto the PC (this is "Software Installation" and is discussed in this chapter).
Setting values for telephony and IP parameters that will fit your system (details are in Chapter 4).
Establishing "phonebooks" that contain the various dialing patterns for VOIP calls made to different locations (a
detailed discussion of this is found in Chapter 5).

Loading MultiVOIP Software onto the PC

The software loading procedure does not present every screen or option in the loading process. It is assumed
that someone with a thorough knowledge of Windows and the software loading process is performing the
installation.
1. Be sure that your MultiVOIP has been properly cabled and that the power is turned on.
2. Insert the MultiVOIP CD into your CD-ROM drive. The CD starts automatically. It may take a few moments
for the Multi-Tech CD installation window to display.
3. When the Multi-Tech Installation CD dialog box appears, click the Install Software icon.
4. A secondary screen appears. Click on the button that matches the model you have purchased. The
installation wizard will start.
Multi-Tech Systems, Inc.
Figure 3-1: Analog MVP splash screen
16