Multitech MultiVOIP MVP210 User Manual page 107

Field Name
Log # column
Start Date,Time
column
Duration column
Type
Status column
IP Direction
Mode column
From column
To column
Special Buttons
Previous
Next
First
Last
Delete File
Call Details
Voice coder
Disconnect Reason
DTMF Capability
Outbound Digits
Received
Outbound Digits
Sent
Server Details
Packets sent
Packets received
Packets lost
Bytes sent
Bytes received
FROM Details
Gateway Name
IP Address
Options
TO Details
Gateway Name
IP Address
Options
Supplementary Services Info
Call Transferred To
Call Forwarded To
Multi-Tech Systems, Inc.
Logs Screen Details: Field Definitions
Values Description
1 or higher All calls are assigned an event number in chronological order, with the
most recent call having the highest event number.
dd:mm:yyyy The starting time of the call. The date is presented as a day and a month
hh:mm:ss of one or two digits, and a four-digit year. This is followed by a time-of-day
in a two-digit hour, a two-digit minute, and a two-digit seconds value.
hh:mm:ss This describes how long the call lasted in hours, minutes, and seconds.
H.323, SIP, SPP Indicates the Call Signaling protocol used for the call (H.323, SIP, or SPP).
success or failure Displays the status of the call (whether the call was completed or not).
incoming, Indicates whether the call is "incoming" or "outgoing" with respect to the
outgoing gateway.
voice or FAX Indicates whether the event being described was a voice call or a FAX call.
gateway name Displays the name of the voice gateway that originates the call.
gateway name Displays the name of the voice gateway that completes the call.
-- Displays log entry before currently selected one.
-- Displays log entry after currently selected one.
-- Displays first log entry
-- Displays last log entry.
-- Deletes selected log file.
Coder protocol The voice coder being used on this call.
"Normal" or Indicates whether the call was disconnected simply because the desired
"Local" conversation was done or some other irregular cause occasioned
disconnection. disconnection (e.g., a technical error or failure).
inband, Indicates whether the DTMF dialing digits are carried "Inband" or "Out of
out of band Band." The corresponding field values differ for the 3 different VOIP
Expressions protocols.
differ slightly for For H.323, this field can display "Out of Band" or "Inband". For SIP it can
different Call display either "Out of Band RFC2833" or "Out of Band SIP INFO" to
Signaling indicate the out-of-band condition or "Inband" to indicate the in-band
protocols. condition. For SPP it can display "Out of Band RFC2833" or "Inband".
0-9, #, * The digits, sent by MultiVOIP to PBX/telco, that were acknowledged as
having been received by the remote VOIP gateway.
0-9, #, * The digits transmitted by the MultiVOIP to the PBX/telco for this call.
When the MultiVOIP is operating in the non-direct mode (with Gatekeeper
n.n.n.n
in H.323 mode; with proxy in SIP mode; or in the client/server configuration
of SPP mode), this field shows the IP address of the server that is directing
IP phone traffic.
integer value Number of data packets sent over the IP network in the course of this call.
integer value Number of data packets received over the IP network in the course of this
call.
integer value Number of voice packets from this call that were lost after being received
from the IP network.
integer value Number of bytes of data sent over the IP network in the course of this call.
integer value Number of bytes of data received over the IP network in the course of this
call.
alphanumeric Identifier for the VOIP gateway that originated this call.
IP address of the VOIP gateway from which the call was received.
n.n.n.n
FEC, SC Displays VOIP transmission options used by the VOIP gateway originating
the call. These may include Forward Error Correction or Silence
Compression.
alphanumeric Identifier for the VOIP gateway that completed (terminated) this call.
IP address of the VOIP gateway at which the call was completed.
n.n.n.n
Displays transmission options used by VOIP gateway terminating the call.
phone number Number of party called in transfer.
phone number Number of party called in forwarding.
Chapter 6: Using the Software
107