Setting And Downloading User Defaults - Multitech MultiVOIP MVP210 User Manual

Setting and Downloading User Defaults

The Download User Defaults command allows you to maintain a known working configuration that is specific to
your VOIP system. You can then experiment with alterations or improvements to the configurations confident that
a working configuration can be restored if necessary.
1. Before you can use the Download User Defaults command, you must first save a set of configuration
parameters by using the Save Setup command in the sidebar menu of the MultiVOIP software.
2. Before the setup configuration is saved, you will be prompted to save the setup as the User Default
Configuration. Select the checkbox and click OK.
A user default file will be created. The MultiVOIP unit will reboot itself.
3. To download the user defaults, go to
4. A confirmation screen will appear indicating that this action will entail rebooting the MultiVOIP.
Click OK.
5. Progress bars will appear during the file transfer process.
6. When the file transfer process is complete, the Dialog / IP Parameters screen will appear.
7. Set the IP values per your particular VOIP system. Click OK. Progress bars will appear as the MultiVOIP
reboots itself.
Multi-Tech Systems, Inc.
Figure 6-25: Save & Reboot
MultiVOIP x.xx
Start | Programs |
Figure 6-26: Confirmation screen
Figure 6-27: Progress bars
Figure 6-28: Dialog screen
Chapter 6: Using the Software
.
| Download User Defaults
123