Registered Gateway Details - Multitech MultiVOIP MVP210 User Manual

Registered Gateway Details

The Registered Gateway Details screen presents a real-time display of the special operating parameters of the
Single Port Protocol (SPP). These are configured in the Call Signaling screen and in the Add/Edit Outbound
Phone Book screen.
Field Name Values
Column Headings
Description alphanumeric
IP Address
n.n.n.n
Port
n
Register
Duration
Status Registered/
unregistered
No. of Entries
Details
Count of
Registered
Numbers
List of
Registered
Numbers
Multi-Tech Systems, Inc.
Figure 6-7: Registered endpoints
Registered Gateway Details: Field Definitions
Description
This is a descriptor for a particular VOIP gateway unit. This descriptor should
generally identify the physical location of the unit (e.g., city, building, etc.) and
perhaps even its location in an equipment rack.
The RAS address for the gateway.
Port by which the gateway exchanges H.225 RAS messages with the gatekeeper.
The time remaining in seconds before the TimeToLive timer expires. If the gateway
fails to reregister within this time, the endpoint is unregistered.
The current status of the gateway either registered or unregistered.
The number of gateways currently registered to the Registrar. This includes all SPP
clients registered and the Registrar itself.
If a registered gateway is selected (by clicking on it in the screen), The "Count of
Registered Numbers" will indicate the number of registered phone numbers for the
selected gateway. When a client registers, all of its inbound phonebook's phone
numbers become registered.
Lists all of the registered phone numbers for the selected gateway.
Chapter 6: Using the Software
111