Downloading Firmware - Multitech MultiVOIP MVP210 User Manual

Downloading Firmware

1. The MultiVOIP Configuration program must be off when invoking the Download Firmware command. If
it is on, the command will not work.
2. To use the Download Factory Defaults command, go to Start | Programs | MultiVOIP x.xx |
Download Firmware.
3. If a password has been established, the Password Verification screen will appear.
Type in the password and click OK.
4. The MultiVOIP x.xx Firmware screen appears saying
"MultiVOIP [model number] is up. Reboot to Download Firmware?"
Click OK to download the firmware.
The "Boot" LED on the MultiVOIP will light up and remain lit during the file transfer process.
5. The program will locate the firmware ".bin" file in the MultiVOIP directory. Highlight the correct (newest)
".bin" file and click Open.
6. Progress bars will appear at the bottom of the screen during the file transfer.
The MultiVOIP's "Boot" LED will turn off at the end of the transfer.
7. The Download Firmware procedure is complete.
Multi-Tech Systems, Inc.
Figure 6-15: Password verification
Figure 6-16: Firmware file
Figure: 6-17: Progress bars
Chapter 6: Using the Software
119