Advanced; Packetization Time - Multitech MultiVOIP MVP210 User Manual

Advanced

Packetization Time

You can use the Packetization Time screen to specify definite packetization rates for coders selected in
the Voice/FAX Parameters screen (in the "Coder Options" group of fields). The Packetization Time
screen is accessible under the "Advanced" options entry in the sidebar list of the main VOIP software
screen. In dealing with RTP parameters, the Packetization Time screen is closely related to both
Voice/FAX Parameters and to IP Statistics. It is located in the "Advanced" group for ease of use.
Packetization rates can be set separately for each channel.
The table below presents the ranges and increments for packetization rates. The final column represents
recommended settings (based on the most common found) when operating with third party devices.
Packetization Ranges and Increments
Coder Types
G711, G726, G727
G723
G729
NetCoder
Once the packetization rate has been set for one channel, it can be copied into other channels by using
the Copy Channel button on the Packetization Time screen. Simply click the boxes next to the channels
you wish to copy the settings for.
Multi-Tech Systems, Inc.
Figure 6-11: Packetization time
Range (in Kbps); {default}
5-120 {5}
30-120 {30}
10-120 {10}
20-120 {20}
Chapter 6: Using the Software
Recommendations
Increments (in Kbps)
5
30
10
20
Setting (in ms)
20
30
20
20
115