Multitech MultiVOIP MVP210 User Manual page 67

The SMTP Parameters dialog box has a secondary dialog box, accessed by the Select Fields button, that allows
you to customize email logging. The MultiVOIP software logs data about many aspects of the call traffic going
through the MultiVOIP. The Custom Fields screen lets you pick which aspects will be included in the email log
reports.
Field Description
Select All Log report to
include all fields shown.
Channel Data channel carrying call.
Number
Duration Length of call.
Packets Sent Total packets sent in call.
Bytes Sent Total bytes sent in call.
Packets Lost Packets lost in call.
Outbound The DTMF dialing digits received by this
Digits gateway from the remote gateway
Received presuming that DTMF is set to "Out of
Band."
Call Status Successful or unsuccessful.
Call Direction Indicates call's originating party.
Server The IP address of the traffic control
Details server (if any) being used (whether an
H.323 gatekeeper, a SIP proxy, or an
SPP registrar gateway) will be displayed
here if the call is handled through that
server.
Disconnect Indicates whether the call was
Reason disconnected simply because the
desired conversation was done or some
other irregular cause occasioned
disconnection (e.g., a technical error or
failure). Values are "Normal" and
"Local" disconnection.
From Details
Gateway Originating gateway
Number
IP Address IP address where call originated.
Descript Identifier of site where call originated.
Options When selected, log will not Silence
Compression and Forward Error
Correction by call originator.
Multi-Tech Systems, Inc.
"Custom Fields" Definitions
Field
Start Date,
Time
Call Mode
Packets
Received
Bytes
Received
Coder
Prefix
Matched
Call Type
DTMF
Capability
Outbound
Digits Sent
Gateway
Name
IP Address
Descript
Options
Chapter 4: Configuring your VOIP
Description
Date and time the phone call began.
Voice or fax.
Total packets received in call.
Total bytes received in call.
Voice Coder /Compression Rate used
for call will be listed in log.
When selected, the phonebook prefix
matched in processing the call will be
listed in log.
Indicates the Call Signaling protocol
used for the call (H.323, SIP, or SPP).
Indicates whether the DTMF dialing
digits are carried "Inband" or "Out of
Band." The corresponding field values
differ for the 3 different VOIP
protocols.
For H.323, this field can display "Out
of Band" or "Inband". For SIP it can
display either "Out of Band RFC2833"
or "Out of Band SIP INFO" to indicate
the out-of-band condition or "Inband"
to indicate the in-band condition. For
SPP it can display "Out of Band
RFC2833" or "Inband".
The dialing digits sent by this gateway
to the remote gateway presuming that
DTMF is set to "Out of Band."
To Details
Completing or answering gateway
IP address where call was completed
or answered.
Identifier of site where call was
completed or answered.
When selected, log will not use Silence
Compression and Forward Error
Correction by party answering call.
67