Table of Contents
Advertisement
Installing Your MVP110 Software
The following installation procedures do not provide every
screen or option in the process of installing the MVP110
software. It is assumed that a technical person with a thorough
knowledge of Windows and the software loading process is
doing the installation. Once you have installed the software,
you will be instructed on how to configure and deploy your
MVP 110. Additional information on the MVP 110 software is
provided in the online Help.
Note: The phonebook directory configuration process is
different depending on whether or not you have an enabled
H.323 Gatekeeper resident in your network. The "Configuring
Your MultiVOIP" section will explain these differences.
The MVP 110 software and User Guide are contained on the
MVP 110 Installation CD. When you have finished configuring
your MVP 110, you can view and print the User Guide by
clicking the Install Manuals icon.
CAUTION: If you are installing the MVP 110 behind a firewall,
the Firewall must support H.323. Refer to your Firewall user
documentation to enable H.323 support.
1. Make certain that your MVP 110 has been properly cabled
and that its power is turned on.
2. Insert the MVP 110 Installation CD into a CD-ROM drive.
The CD is auto-detectable, so it starts automatically. It
may take 10 to 20 seconds for the Multi-Tech Installation
CD window to appear.
Installing the Software
11
Advertisement
Table of Contents
