Multitech MultiVOIP MVP210 User Manual page 34

Field Name Values
Diff Serv PHB (Per Hop Behavior) values pertain to a differential prioritizing system for IP packets as
Diff Serv
handled by Diff Serv-compatible routers. There are 64 values, each with an elaborate technical
Parameter
description. These descriptions are found in TCP/IP standards RFC2474, RFC2597, and, for present
fields
purposes, in RFC3246, which describes the value 34 (34 decimal; 22 hex) for Assured Forwarding
behavior (default for Call Control PHB) and the value 46 (46 decimal; 2E hexadecimal) for Expedited
Forwarding behavior (default for VOIP Media PHB). Before using values other than these default
values of 34 and 46, consult these standards documents and/or a qualified IP telecommunications
engineer.
To disable Diff Serv, configure both fields to 0 decimal.
Call Control 0 – 63
PHB default = 34
VOIP Media 0 – 63
PHB default = 46
FTP Parameter fields
FTP Server Y/N
Enable Default =
disabled
See "FTP
Server File
Transfers" in
Chapter 6
DNS Parameter fields
Enable DNS Y/N
Default =
disabled
Enable SRV Y/N
DNS Server IP
n.n.n.n
Address
Multi-Tech Systems, Inc.
Ethernet/IP Parameter Definitions (continued)
Description
Value is used to prioritize call setup IP packets.
Setting this parameter to 0, in conjunction with VOIP Media PHB below will disable
Diff Serv.
Value is used to prioritize the RTP/RTCP audio IP packets.
Setting this parameter to 0, in conjunction with Call Control PHB above will disable
Diff Serv.
MultiVOIP unit has an FTP Server function so that firmware and other important
operating software files can be transferred to the VOIP via the network.
Enables Domain Name Space/System function where computer names are resolved
using a worldwide distributed database.
Enables 'service record' function. Service record is a category of data in the Internet
Domain Name System specifying information on available servers for a specific
protocol and domain, as defined in RFC 2782. Newer internet protocols like SIP,
STUN, H.323, POP3, and XMPP may require SRV support from clients. Client
implementations of older protocols, like LDAP and SMTP, may have been enhanced
in some settings to support SRV.
IP address of specific DNS server to be used to resolve Internet computer names.
Chapter 4: Configuring your VOIP
34