Voice/Fax - Multitech MultiVOIP MVP210 User Manual
Voice/fax over ip gateways
Hide thumbs
Also See for MultiVOIP MVP210:
- User manual (565 pages) ,
- Configuration manual (79 pages) ,
- Supplementary manual (8 pages)
Table of Contents
Advertisement
Chapter 4: Configuring your VOIP
Voice/Fax
Setting the Voice/FAX Parameters. The Voice/Fax section needs to be set for each channel to be used. However,
once you have established a set of Voice/FAX parameters for a particular channel, you can apply this entire set of
Voice/FAX parameters to another channel by using the Copy Channel button and its dialog box. To copy a set of
Voice/FAX parameters to all channels, select "Copy to All" and click Copy.
The majority of the settings should be left at their default settings as changes often introduce problems with signal
quality. In each field, enter the values that fit your particular setup. The –SS models do not have Configurable
Payload Type available.
Figure 4-2: Voice/Fax parameters
The Voice/FAX Parameters settings are described in the tables below.
Multi-Tech Systems, Inc.
35
Advertisement
Table of Contents
